How to Fix PS4 Controller Flashing White Issue?

PS4 Controller Flashing White 2023

The PS4 controller flashing white issue is a common problem that can be caused by a number of factors. Here are some troubleshooting tips that you can try to fix the problem:

Fix PS4 Controller Flashing

  • Check the battery. Make sure that the batteries in your controller are fresh and have a good charge. If the batteries are low, the controller may flash white to indicate that it needs to be charged.

 

  • Reset the controller. If the batteries are not the problem, you can try resetting the controller. To do this, hold down the Share and PS buttons on the controller at the same time for about 7 seconds. The controller will turn off, and then turn back on.Quick Trick to Fix PS4 Flashing White Issue

Step 1: Turn off your PlayStation 4.

Step 2: Locate the reset button, and it’s on the back of your controller near the L2 shoulder button.

Step 3: Use a small and unfolded paper clip or something like that to push the button and hold it down for a few seconds, and then release it.

Step 4: After resetting the controller, re-pair the controller with the PS4 by connecting the USB cable correctly, and turning the PS4 on.

Step 5: Press the PS button to log in to the PS4.

  • Update the firmware. There may be a firmware update available for your controller that can fix the problem. To check for updates, connect your controller to your PS4 and go to Settings > Devices > Controllers > Wireless Controller. If there is an update available, it will be listed under Firmware.

Using a USB drive

  1. Download the latest firmware update from the Sony website.
  2. Create a folder on the USB drive named “PS4“.
  3. Create a folder inside the “PS4” folder named “UPDATE“.
  4. Copy the firmware update file (PS4UPDATE.PUP) to the “UPDATE” folder.
  5. Connect the USB drive to your PS4.
  6. Turn off your PS4.
  7. Press and hold the power button until you hear two beeps.
  8. Select Safe Mode.
  9. Select Update System Software > Update from USB Storage Device.
  10. Follow the on-screen instructions to complete the update.
  • Pair the controller with your PS4. If the firmware is up to date, you can try pairing the controller with your PS4 again. To do this, hold down the PS button on the controller until the light bar starts flashing. Then, on your PS4, go to Settings > Devices > Bluetooth Devices and select your controller from the list of devices.

 

  • Contact Sony support. If you have tried all of the above steps and the problem is still not fixed, you can contact Sony support for help.

Fixed: PS4 Controller Flashing White 2023

Why Is PS4 Controller Flashing Orange?

If your PS4 controller is flashing white light then orange, t is charging in rest mode. If your controller isn’t charging while on standby, then follow the below steps;

  1. Go to Settings.
  2. Power Save Settings.
  3. Set Features Available in Rest Mode > Supply Power to USB Ports and choose one of the options.

Why Is PS4 Controller Flashing Orange

If the flashing white light stops before the controller is fully charged, it could be due to a problem with the charging cable or USB ports. Try using different cables or ports, and if you have another controller, try using that one to see if it charges properly. To rule out minor issues, restart your PS4, reset the controller, and charge it for a few hours. If the controller still loses charge quickly, the internal battery may be faulty.

Why Is PS4 Controller Blinking Blue?

If your PS4 controller is blinking blue, it typically indicates that the controller is attempting to pair or connect with the PlayStation 4 console.

The blinking blue light is part of the pairing process, signaling that the controller is in “Bluetooth pairing mode” and searching for a compatible device to connect to, which, in this case, is your PS4 console.

The blinking blue light commonly occurs in the following situations:

  1. Initial Setup: When you first set up your PS4 or after a factory reset, the controller will enter pairing mode to establish a connection with the console.
  2. Resyncing: If the controller becomes disconnected or unresponsive during gameplay, it may blink blue when you try to resync it with the console.
  3. Connecting to Another Device: Sometimes, if you accidentally initiate pairing mode while using the controller with other Bluetooth devices, it may start blinking blue while attempting to connect to those devices.

Here are some additional tips that may help you fix the PS4 controller flashing white issue:

  • Try using a different USB cable to connect the controller to your PS4.
  • Try connecting the controller to a different USB port on your PS4.
  • Try restarting your PS4.
  • Try rebuilding the database on your PS4.

I hope these tips help you fix the PS4 controller flashing white issue.